Priming The Ink Delivery Lines - Kodak 4000 series Quick Start Manual

With the power on, press Utility/Access Cartridges to move the
1
carriage to the center.
2 Remove the cartridge from the sealed bag and remove the shipping
cap.
3 Install the cartridge bottom first into the correct slot on the carrier.
DO NOT REMOVE THE BLUE TAPE FROM THE JET PLATE. Tilt
the cartridge up until it clicks into place. Make sure the cartridge is
firmly seated.

Priming the ink delivery lines

After filling the ink reservoirs, prime each of the four ink delivery lines to
establish ink flow through the lines and ink cartridges. The cartridge primer is
provided for this purpose. Be sure the cartridge primer has batteries in it before
continuing.
Kodak Professional large format 4000 series printers
Sight Tube
17