Install Ink Cartridges - Kodak VERITE Craft 6 Extended User Manual

Install ink cartridges

Install ink cartridges to ink cartridges holder
1
Remove the black and color ink cartridges from packaging.
Black
2
Remove the plastic tape on the black and color ink
cartridges using the red pull tab.
DO NOT TOUCH
DO NOT TOUCH the gold contact area on the back or
●
the metal nozzles on the bottom of the cartridge.
3
Lift the Ink door to access the cartridge slot.
4
Press front side blue Cartridge tab with 2 fingers to open the
cartridge slot.
English
Color
1
2
13
5
Slide the color ink cartridge all the way into the right slot
using the green rail.
6
Slide the black ink cartridge all the way into the left slot using
the green rail.
7
Push and click the center green Cartridge tab to close the
cartridge slot until the cover snaps securely into position.
8
Close the Ink door.
CAUTION
Ink Cartridge Not Inserted Correctly!
If the Ink door does not close properly, the ink
●
cartridges are not inserted correctly. Remove the ink
cartridges and then correctly insert them again.
DO NOT PUSH the green/blue
parts at the same time.
OPEN: use only BLUE part.
CLOSE: use only GREEN part.
Color(Right)
Black(Left)
Green
Blue
Continued on next page.