Pausing The Printer; Canceling A Print - Kodak 4000 series Quick Start Manual

Cartridge-related error messages are listed in Appendix E of the Reference
Guide on the system CD-ROM.
To clear a cartridge-related error, press Access Cartridges to move the carriage
to the position which allows replacement of the ink cartridges. Check to make
sure you have the correct cartridges installed in each position, that they all
contain the same type of ink, and all cartridges are installed correctly. Install
new cartridges if necessary.
To clear cartridge recognition error:
Press Access Cartridges to move the carriage to the position which
1
allows replacement of the ink cartridges.
2 Verify that four cartridges are installed. Replace any invalid
cartridges.
3 Press OK. If the problem has been corrected, the printer will
proceed with the print request. If the problem has not been
corrected, the printer will make a beep.

Pausing the printer

To pause the printer while printing, press the Pause button. Press it again to
resume printing.

Canceling a print

To cancel a print, send a cancel order from the host computer using the appropri-
ate command for your software application. For example, you can delete the file
in the Print Manager/Print Options. To clear the buffer after cancelling a print,
press Reset on the Main menu.
Kodak Professional large format 4000 series printers
27