Filling The Ink Reservoirs - Kodak 4000 series Quick Start Manual

Press Utility/Access Cartridge to move the carriage back into the
3
service station. This ensures that the cutter blade is in the home
position.

Filling the ink reservoirs

Note: On the 4742 and 4760 printers, do not add more than 300ml of ink or fill
higher than 1 inch from top of the reservoir when running at carriage speeds
faster than 5. Note that the default carriage speed is 10 for all print modes.
Refill reservoirs when the ink level is approximately 50ml or 1/4 inch from the
bottom. Allowing ink levels to drop lower increases the risk of getting air in the
ink lines and losing pressure.
To fill the ink reservoirs:
1 Open the cover on the left side of the printer to access the ink
reservoirs. Unscrew and remove the cap of one reservoir. Open only
one reservoir at a time to prevent contamination with other ink
colors.
2 Make sure the ink color and type matches the reservoir and pour in
the ink. Be sure to use the same type of ink in all the reservoirs and
ink cartridges. Be sure there is no excess ink on the inside of the
reservoir cap. Replace the cap loosely on the reservoir. Do not
overtighten the cap.
Kodak Professional large format 4000 series printers
15