Setting Of Country/Language (Function Code 52) (User-Accessible) - Brother DCP6690CW Service Manual

9.4.11 Setting of Country/Language (Function code 52) (User-accessible)

Function
Machines have been customized for their destination countries with the corresponding
EEPROM customizing codes (see
customizing codes are shared by two or more destination countries as listed below, so the
machines customized by these codes require further specifying individual destination countries
or languages.
Usually, the user specifies the destination country or language on the LCD screen called up
automatically when turning the machine on first after purchase. In the same way, the service
personnel also specifies it if the main PCB is replaced; however, if he/she does not specify the
destination country or language at that timing, be sure to perform the procedure given below.
For MFC only
EEPROM Customizing Code
For DCP only
EEPROM Customizing Code
Operating Procedure
(1) Press the 5 and 2 keys in this order in the initial stage of the maintenance mode.
The "Set Country" or "Select Language" appears on the LCD.
NOTE: If an EEPROM customizing code other than those listed above has been specified,
the machine automatically returns to the initial stage of the maintenance mode without
displaying the country/language menu.
NOTE: The messages shown during this procedure are in US English.
(2) Use the
the desired country or language.
NOTE: For selectable countries and languages, refer to the tables shown above.
(3) Press the OK key (Photo Capture key for models without OK key), and the machine
saves the new setting and returns to the initial stage of the maintenance mode. This
completes the setting procedure.
0057 Norway, Sweden, Finland, and Denmark
0056 Australia and New Zealand
0004 English, French, German, Dutch, and Italian
0015 English, Spanish, Portuguese, and Italian
0007 English, Norwegian, Swedish, Danish, and Finnish
English, Czech, Hungarian, Polish, Bulgarian, Romanian,
0054
Slovak, and German
and keys (Scan and Copy keys for models without
Section 9.4.22, Function code 74). However, some
9-24
Countries
Languages
and keys) to display
Confidential