Riser Card Options; Figure 29. 2U Pci Express* Passive Riser; Table 30. Riser Card Options - Intel SR2612UR Product Specification

Hide thumbs Also See for SR2612UR:

Table of Contents

Intel® Server System SR2612UR TPS

8.1

Riser Card Options

The Intel

Server Board S5520UR has one riser slot capable of supporting riser cards for both

1U and 2U system configurations. The riser slot (J4E1) implements Intel

Technology. This 280-pin connector is capable of supporting riser cards that meet either the

PCI-X or PCI Express* technology specifications. Some risers can support both full-height and

low-profile add-in cards by using a 'butterfly' configuration. The riser card assembly uses

screws to attach the PCI bracket to the riser card assembly.

The following table identifies the card configurations and the connector types used.

Riser Card Option

2U PCI Express* Passive Riser

(Product Order Code – ASR26XXFHR)

2U Butterfly PCI Express* Active Riser

(Product Order Code – ASR26XXFHLPR)

Note: All PCI Express* add-in cards run at x8 speeds independent of population. The PCI

Express* x16 connectors use a x8 electrical connection.

Revision 1.3

Three full-height PCI Express* connectors.

Ship in Intel

Three full-height PCI Express* connectors

Two low-profile PCI Express* connectors

Intel order number E76293-003

PCI Riser Cards and Assembly

Adaptive Slot

Slot Configuration

Server System SR2612UR

Table of Contents