Replacing Ink Sensor Assembly - Xerox 7142 Service Manual

RJ-901C/RJ-900C Maintenance Manual
4.8.2

Replacing Ink Sensor Assembly

NOTE
Before replacing the ink ID sensor assembly, remove the following parts.
• I/H assembly:
1. Detach the ink ID sensor assembly cable from the hooks (2 pieces) on the back of the I/H assembly.
2. Remove the screw retaining the ink ID sensor to the IC holder mounting plate (tapping screw M3
cup: 2).
1
2
3. Remove the screw retaining the ink END sensor to the IC holder mounting plate (tapping screw M3
S cup: 1pce).
"4.8.1 Replacing Ink Holder (I/H) Assembly" p.4-55
3
2
1
No.
1 Ink ID sensor
2 IC holder mounting plate
3 Ink ID sensor screw
No.
1 Ink END sensor screw
2 Ink END sensor
4-57
4 Parts Replacement
×
Part name
Part name
6, S
×
10,