Introduction; Product Specifications - Xerox 7142 Service Manual

3 Specifications

3.1 Introduction

This chapter explains the specifications of the product, optional parts, and supplies. Installation environment
requirements are also explained.

3.2 Product Specifications

(1) Main Unit Specifications
Item
Model name
Plotting method
Motor driving method
Media feeding method
Media fixing method
Media supply and Cut media
ejection
Roll media
Media type
Roll media outer 2-inch
diameter
3-inch
Maximum Cut media
loadable media
Roll media
length
Maximum loadable media width
Maximum Plot Cut media
length
Roll media
Maximum media width
Plotting margins Cut media
Roll media
Media cutting method
Head height adjustment
Distance accuracy
Right angle accuracy
RJ-901C/RJ-900C Maintenance Manual
RJ-901C
On-demand piezo drive
Firmware servo/DC motor drive
Multi-point pressure grid roller method
Pressurizing roller manual-down method
Front feeding/front paper ejection
Front feeding/front paper ejection
Tracing paper, plain paper, film, coated paper, glossy paper
100 mm or less
100 mm or less
1200 mm (47.2 in.)
610 mm (24.0 in.)
1180 mm (46.4 in.)
604 mm (23.8 in.)
Top: 3mm, Bottom: 17mm, Left:3mm, Right: 3 mm
Top: 3mm, Bottom: 3mm, Left:3mm, Right: 3 mm
2 levels: Normal / High
± 0.25 mm or ± 0.1% of moving distance or less
• Used media: Matte film 50µm
• Operating temperature: 20ºC (68F)
• Operating humidity: 60%
• Plot mode: High quality
±0.1mm or less against the moving distance (500.0mm)
• Used media: Matte film 50µm
• Operating temperature: 20ºC (68F)
• Operating humidity: 60%
• Plot mode: High quality
3-2
Specifications
RJ-900C
150 mm or less
150 mm or less
1600 mm (63.0 in.)
50 m (164.0 ft.)
1080 mm (42.5 in.)
1580 mm (62.2 in.)
18 m (59.1 ft.)
1074 mm (42.3 in.)
Lateral auto-cut