Xerox 7142 Service Manual page 32

2 Product Overview
No. Name
7 [Forward feed] key
[Setting/value -] key
8 [Power] key
(2) LCD Monitor and Status Lamps
No. Name
9 Power lamp
10 Data lamp
11 Roll lamp
12 Sheet lamp
13 Color lamp
14 Black & white
lamp
15 High speed lamp
16 Normal lamp
17 LCD monitor
Normal
Feeds the media in the forward
direction.
-
Turns the plotter on and off.
Color Status
Green On The plotter is switched on.
Blinking An error has occurred. The contents will be displayed on the
LCD monitor.
Off The plotter is switched off.
Red On - The plotter is analyzing received data.
- The plotter is printing data.
Blinking The plotter is receiving data.
Off The plotter is not receiving, analyzing or printing data.
Green On The media loaded in the plotter is set to roll media.
Off The media loaded in the plotter is set to cut media.
Green On The media loaded in the plotter is set to cut sheet.
Off The media loaded in the plotter is set to roll sheet.
Red On The plot mode is set to color.
Off The plot mode is set to monochrome.
Red On The plot mode is set to monochrome.
Off The plot mode is set to color.
Green On - The plot mode is set to High speed.
- When the Normal lamp is also on, the print mode is set to
High quality.
Off The plot mode is set to Normal.
Green On - The plot mode is set to Normal.
- When the Normal lamp is also on, the print mode is set to
High quality.
Off The plot mode is set to High speed.
- - This monitor displays the operation status and error
messages of the plotter.
RJ-901C/RJ-900C Maintenance Manual
-
- Changes the setting value in the
reverse direction.
- Decreases the value when inputting
values.
Turns the plotter on and off.
Function
2-8
Setup menu display