Replacing Cr_Hp Sensor - Xerox 7142 Service Manual

RJ-901C/RJ-900C Maintenance Manual
6. Remove the screws retaining the CR motor assembly to the CR motor mounting material (cup screw M4
×
8: 4pcs).
1
2
7. Replace the CR motor assembly.
8. To reassemble the unit, reverse the removal procedure.
9. Perform adjustments by following the instructions in
4.5.2

Replacing CR_HP Sensor

NOTE
Before replacing parts in the CR_HP sensor assembly, remove the R side cover.
• R side cover:
1. Release the CR locker by pushing it with your finger, then move the carriage from the capping position
to the left.
"4.2.1 Removing R Side Cover" p.4-6
No.
1
2
3
"7.2 Adjustment Item"
4-31
4 Parts Replacement
Part name
CR motor mounting
material
CR motor screw
CR motor
p.7-3.