RJ-901C/RJ-900C Maintenance Manual
(6) Mechanical Parameter
This menu updates the mechanical position parameters. Setting items are as follows:
•
Top distance
•
Bottom distance
•
Side margin
•
P_REAR sensor position
Next menu
Next menu
Next menu
Next menu
(7) Ink Parameter
This updates the ink parameter. The available options are as follows.
•
Set: Ink not charged
•
Reset: Ink charged
NOTE
Selecting "Set" in the Ink Parameter Update Menu will terminate the self-diagnosis mode. When
activated in the normal mode, the plotter performs initial charging.
When selecting "Set", be sure to install the cartridge.
[Enter]
Previous menu
key
Previous menu
Previous menu
Previous menu
[Enter] key
[Enter] key
5-57
5 Self-Diagnosis Mode
When any parameter has been changed
[Enter] key
When any parameter
has been changed