Xerox 7142 Service Manual page 203

RJ-901C/RJ-900C Maintenance Manual
Part replaced or
adjusted
Main board
assembly
CR motor assembly
Table 7-1 Adjustment Item List(Continued)
Adjustment
order
1 Parameter backup
2 Firmware installation
3 Voltage input (no need for initial ink
charge)
4 Head nozzle check
5 Repeatability adjustment
6 Band feed correction
7 Top & bottom adjustment
8 P_REAR sensor position adjustment
9 Media sensor sensitivity adjustment
10 Test printing
1 CR belt tension adjustment
2 Repeatability adjustment
3 Top & bottom adjustment
4 Test printing
Adjustment item
7-5
7 Adjustment
Reference
"5.5.2 Head Rank
Input Menu" p.5-25
"5.5.3 Head Nozzle
Check Menu" p.5-26
"5.5.2 Head Rank
Input Menu" p.5-25
"5.5.3 Head Nozzle
Check Menu" p.5-26
"5.5.7
Repeatability
Adjustment Menu"
p.5-35
"5.5.9 Band Feed
Correction Menu"
p.5-41
"5.5.10 Top and
Bottom Adjustment
Menu" p.5-42
"5.5.11 P_REAR
Sensor Position
Adjustment Menu"
p.5-43
"7.11 Media
Sensor Sensitivity
Adjustment" p.7-33
"5.5.12 Test
Printing Menu" p.5-44
"7.6 CR Belt
Tension Adjustment"
p.7-25
"5.5.7
Repeatability
Adjustment Menu"
p.5-35
"5.5.10 Top and
Bottom Adjustment
Menu" p.5-42
"5.5.12 Test
Printing Menu" p.5-44