29Y.xx Paper Jams - Lexmark MX310 Series Service Manual

28y.xx paper jams
28x.xx paper jams
Error code Description
280.06 Paper Missing—Posted when paper is
removed from input tray after job is initiated.
282.01 ADF Static Jam—Interval Sensor active at
POR time.
282.03 ADF Pickup Jam—LE of paper does not reach
Interval Sensor in time.
282.05 ADF Long Page—TE never clears interval
sensor (but 1st Scan Sensor and Exit Sensor
are both active).
283.01 ADF Static Jam—1st Scan Sensor active at
POR time.
283.03 ADF Feed Jam—LE of paper does not reach
1st Scan Sensor in time.
283.05 1st Scan Sensor Jam—TE never clears 1st
Scan Sensor.
286.02 ADF Backfeed—Page(s) in the exit area
accidentally gets pulled into the reverse
path.
286.03 ADF Backside Feed Jam—LE does not reach
the multi-purpose Interval Sensor in time
when page routed through reverse area.
286.05 ADF Backside Jam—TE does not reach the
multi-purpose Interval Sensor in time when
page routed through reverse area.

29y.xx paper jams

29x.xx paper jams
Error code Description
290.11 ADF Cover Open Jam—Posted when ADF top
cover is opened during ADF job.
Action
Ensure that the ADF document sensor is in the proper position
and clear of dust and deris. Retry the job. If the error recurs, then
see "ADF paper jam service check" on page
Remove the sheet of paper rom the ADF. Retry the job. If the
error recurs, then see
page 134.
Remove the sheet of paper rom the ADF. Check the media
weight, Heavier paper should not be used. Make the stack of
documents in the tray smaller. Ensure that the media is not being
shoved into the tray. Retry the job. If the error recurs, then see
"ADF paper jam service check" on page
Inspect the ADF paper path for paper fragments. Restart the
MFP. If the error recurs, then see
on page 134.
Remove the sheet of paper rom the ADF. Retry the job. If the
error recurs, then see
page 134.
Remove the sheet of paper rom the ADF. Retry the job. If the
error recurs, then see
page 134.
Too many sheets of paper in the ADF exit bin. Remove the sheets
from the ADF exit bin.
Remove the sheet of paper from the ADF. Retry the job. If the
error recurs, then see
page 134.
Action
Close the cover. If the error recurs, then perform the ADF cover
open service check
Diagnostic information
75
134.
"ADF paper jam service check" on
134.
"ADF paper jam service check"
"ADF paper jam service check" on
"ADF paper jam service check" on
"ADF paper jam service check" on
7015