Incorrect Paper Size, Open [Paper Source] [34]; Insufficient Memory, Some Held Jobs Were Deleted [37]; Insufficient Memory, Some Held Jobs Will Not Be Restored [37]; Insufficient Memory For Flash Memory Defragment Operation [37] - Lexmark MX310 Series Service Manual

Incorrect paper size, open [paper source] [34]

Try one or more of the following:
•
Load the correct size of paper in the tray.
•
From the printer control panel, select Continue to clear the message and print using a different tray. For
non‑touch‑screen printer models, press
•
Check the tray length and width guides and make sure the paper is loaded properly in the tray.
•
Make sure the correct paper size and type are specified in the Printing Preferences or in the Print dialog.
• Make sure the paper size and type are specified in the Paper menu on the printer control panel.
•
Make sure that the paper size is correctly set. For example, if MP Feeder Size is set to Universal, then make sure
the paper is large enough for the data being printed.
•
Cancel the print job.

Insufficient memory, some Held Jobs were deleted [37]

The printer deleted some held jobs in order to process current jobs.
Select Continue to clear the message. For non-touch-screen printer models, press

Insufficient memory, some held jobs will not be restored [37]

Try one or more of the following:
• From the printer control panel, select Continue to clear the message. For non-touch-screen printer models, press
to confirm.
• Delete other held jobs to free up additional printer memory.

Insufficient memory for Flash Memory Defragment operation [37]

Try one or more of the following:
•
From the printer control panel, select Continue to stop the defragmentation and continue printing. For
non‑touch‑screen printer models, press
• Delete fonts, macros, and other data from the printer memory.
•
Install additional printer memory.

Insufficient memory to collate job [37]

Try one or more of the following:
•
From the printer control panel, select Continue to print the part of the job already stored and begin collating the
rest of the print job. For non‑touch‑screen printer models, press
•
Cancel the current print job.
to confirm.
to confirm.
Diagnostic information
80
to confirm.
to confirm.
7015