Jams in the Rear Cover
Paper is jammed in the rear cover. Remove the jammed paper
using the procedure given below.
Open the printer's rear cover all the way.
1
Open the fuser cover as illustrated below. While
2
holding down the release lever (green-colored), re-
move the jammed paper as shown in the figure.
Close the rear cover.
3
Jams at the MP Tray
Paper is jammed at the MP tray. Remove the jammed paper
using the procedure given below.
Remove the jammed paper.
1
Put all the paper out of the MP tray, align the edges
2
of the paper and reset the paper into the MP tray.
Chapter 4 Troubleshooting
4-11