Kyocera FS-6020 Operation Manual page 75

Chapter 3 Maintenance
Gently lift the toner container and remove it.
3
NOTE
Keep the removed toner container flat.
Put the supplied cap on the used toner container to
4
prevent toner spill.
The cap should not be put on the
new toner container.
Place the used toner container into the supplied
5
plastic bag, and seal it up before disposing.
Take a new toner container out of the toner kit.
6
3-2
Shake the new toner container as shown in the fig-
7
ure below ten times or more to ensure that the toner
is evenly distributed inside.
Carefully remove the protective seal (orange-col-
8
ored) from the new toner container as shown below.
Install the new toner container into the printer.
9
Push firmly on the top of the toner container at the
positions marked PUSH HERE until you hear it click
into place.