Removing The Cpu Module (Hp Authorized Service Providers Only); Table 2-9. Cpu Module Replacement Part Numbers - HP Omnibook XE3 Service Manual

Removing the CPU Module
(HP Authorized Service Providers Only)
Description
Module, CPU (Pentium III-M, 866 MHz Tualatin)
Module, CPU (Pentium III, 933 MHz Tualatin)
Module, CPU (Pentium III-M, 1.06 GHz Tualatin)
Module, CPU (Pentium III, 1.13 GHz Tualatin)
Module, CPU (Celeron-T, 800 MHz Tualatin)
Module, CPU (Celeron-T, 866 MHz Tualatin)
Module, CPU (Celeron-T, 933 MHz Tualatin)
Required Equipment
•
#0 Phillips screwdriver.
•
Small flat-blade screwdriver.
Removal Procedure
Caution
Be careful not to touch the upper surface of the CPU module. Handle it only by its edges, or you
could damage it.
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove these additional assemblies:
•
Keyboard cover (page 2-8).
•
Keyboard (page 2-10).
•
Display assembly (page 2-16).
•
Top case (page 2-19).
•
Hinge saddle set (page 2-22).
•
Heatsink assembly (page 2-24).
3. Pentium SKUs: Carefully insert the tip of a flat-blade screwdriver in the CPU module lock
mechanism, and turn the screwdriver a few degrees counterclockwise until the mechanism clicks
into its OPEN position. (The CPU socket moves slightly to the left when this happens.)
Grasp the CPU module by its edges, and carefully lift it straight up and off of its socket.
2-26 Removal and Replacement

Table 2-9. CPU Module Replacement Part Numbers

Part Number Exchange Part Number
F3950-60901 F3950-69101
F3257-60904 F3257-69004
F3941-60901 F3941-69101
F3257-60906 F3257-69006
F3943-60901 F3943-69101
F3944-60901 F3944-69101
F3946-60901 F3946-69101
HP Omnibook XE3 (Technology Code GF)