Removing The Hard Disk Drive (Hp Authorized Service Providers Only); Table 2-7. Hard Disk Drive Replacement Part Numbers - HP Omnibook XE3 Service Manual

Removing the Hard Disk Drive
(HP Authorized Service Providers Only)
Description
Drive, hard disk (10 GB, 9.5 mm, Hitachi)
Drive, hard disk (10 GB, 9.5 mm, Hitachi)
Drive, hard disk (10 GB, 9.5 mm,
IBM DJSA-210)
Drive, hard disk (20 GB, 9.5 mm, Hitachi)
Drive, hard disk (20 GB, 9.5 mm,
IBM [Diablo] ATA100)
Drive, hard disk (30 GB, 9.5 mm,
Toshiba ATA66)
Required Equipment
•
#0 Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove these additional assemblies:
•
Keyboard cover (page 2-8).
•
Keyboard (page 2-10).
Caution
Be careful not to touch the heatsink until it has cooled. It could be hot if the notebook was running
recently.
3. Loosen the four screws attaching the hard drive carrier to the motherboard (the carrier retains the
screws).
4. Use the strap on the hard drive to carefully pull the drive off of its connector and out of the
notebook.
2-12 Removal and Replacement

Table 2-7. Hard Disk Drive Replacement Part Numbers

Part Number Exchange Part Number
F1664-60902 F1664-69002
F2072-60908 F2072-69108
F1660-60912 F1660-69112
F2072-60913 F2072-69113
F1660-60914 F1660-69114
F2332-60903 F2332-69003
HP Omnibook XE3 (Technology Code GF)