HP Omnibook XE3 Service Manual page 85

Symptom Call Center:
Suggestions
PC card
Miscellaneous Remove and reinsert PC
problems. card.
Restart notebook.
Try card in other slot or in
another computer.
Check for conflicts or refresh
device list in Device
Manager. If card requires an
IRQ, make sure one is
available.
Check HP Notebook web site
for installation instructions
and information about
supported PC cards (see
page vi).
When using PC card in a
docking system, insert or
remove card while system is
turned on.
Download current drivers
from card manufacturer's
web site.
Certain Xircom CE2 (IIps)
LAN cards conflict with game
port device in Windows 2000.
Contact Xircom for details.
PC card modem not Disable internal modem.
working.
Video file playback
AVI or MPEG file Before playing, press Fn+F5
doesn't play with to switch to one display.
two displays. Cannot switch displays after
play begins.
If using both displays, video
image will not appear on any
display set up as
"secondary". Open Display in
Control Panel, click
Advanced on Settings tab,
and change settings.
Resolution or color Set the resolution or color
depth problems depth before starting the
when playing an video file player. You cannot
AVI or MPEG file. change these settings after
play begins.
Some combinations of color
depth and resolution are not
supported in video file
playback. If you receive an
error message, reduce color
depth or display resolution.
Performance
Clock loses time. Plug in AC adapter for 24
hours to charge CMOS
battery.
3-20 Troubleshooting and Diagnostics
Repair Center: Repair Center:
Likely Causes Comments
PC card. Using a flashlight, look for
bent pins inside PCMCIA
PCMCIA socket.
socket.
Motherboard.
If both slots have problems,
replace motherboard. If only
one slot has a problem, try
replacing PCMCIA socket.
Motherboard.
HP Omnibook XE3 (Technology Code GF)