Figure 2-20. Removing The Cpu Module (Celeron) - HP Omnibook XE3 Service Manual

4. Celeron SKUs: Turn the lock screw one-half turn counterclockwise to release the CPU module,
and remove the CPU module from the motherboard.
CPU module
Reassembly Notes
•
Carefully reinsert the module into its socket. Make sure the module is fully seated, and that none of
its pins are bent or otherwise damaged.
•
Pentium SKUs: Carefully insert the tip of the flat-blade screwdriver in the CPU module lock
mechanism, and turn the screwdriver a few degrees clockwise until the mechanism clicks into its
LOCK position. (The CPU socket moves slightly to the right when this happens.)
•
Celeron SKUs: Carefully insert the CPU module into the motherboard. The module is keyed for
installation, and can only be inserted one way. Turn the lock screw one-half turn clockwise to
secure the CPU module.
2-28 Removal and Replacement

Figure 2-20. Removing the CPU Module (Celeron)

HP Omnibook XE3 (Technology Code GF)
CPU module
lock mechanism