Using/Replacing Footrest Strap
Footrest straps MUST be inspected before each use. Exposure to moisture (i.e.- wet
weather or puddles) will damage fastening strips. Footrest strap will not hold feet
securely in footrest if fastening strips are damaged. DO NOT operate handcycle if
footrest straps are wet or damaged, otherwise severe injury may occur.
ALWAYS wear shoes and securely strap feet in using straps provided. Severe injury
may occur if feet are not secured while the handcycle is in motion.
Using Footrest Strap
NOTE: For this procedure, refer to
FIGURE 6.2.
1. Place feet in footrests.
2. Secure feet to footrest strap using small
fastening straps.
Replacing Footrest Strap
NOTE: For this procedure, refer to
FIGURE 6.3.
1. Pull apart fastening straps securing
existing footrest strap to footrest.
NOTE: The small fastening straps should face
up.
2. Wrap end of footrest strap over and
around the inner footrest tube and
firmly connect the hook and loop
portions of the footrest strap
(Detail ʺAʺ).
3. Wrap end of footrest strap over and
around the outer footrest tube and
under the inner footrest tube and
firmly connect the hook and loop
portions of the footrest strap (Details
ʺAʺ and "B").
4. Ensure the footrest strap is firmly
attached to the loop fastening strip on
the outer footrest tube.
Part No 1114850
SECTION 6—RIDING POSITION
WARNING
Fastening Straps
FIGURE 6.2 Using Footrest Strap
Footrest Strap
Loop Portion
(STEP 3)
Small Fastening
Straps
Inner Footrest
Tube
End of Footrest Straps (STEP 4 AND 5)
Inner
Footrest
Tube
Outer Footrest
Tube
FIGURE 6.3 Replacing Footrest Strap
33
Footrest
Footrest
Strap
DETAIL "A"
End of Footrest Straps (STEP 4)
Strap Hoo
Outer
Footrest
DETAIL "B"
Loop Fastening
Strip (STEP 6)
Recumbent Handcycle Series
Footrest
Portion
(STEP 3)
Tube