Installing The Water Bottle; Installing/Using The Tow Bar - Invacare Force Owner's Operator And Maintenance Manual

Installing the Water Bottle

NOTE: For this procedure, refer to FIGURE 9.2.
1. Secure the water bottle mounting tube to the seat frame using the hardware provided.
NOTE: Make sure that the water bottle mounting bracket mounting holes are facing downward.
2. Attach the water bottle mounting bracket to the mounting tube using the hardware
provided.
3. Push water bottle into mounting bracket until secure.
Seat Frame
Mounting
Bracket

Installing/Using the Tow Bar

NOTE: For this procedure, refer to FIGURE 9.3.
NOTE: The tow bar will not work with wheelchairs with swingaway front riggings. Only rigid
wheelchairs with a tubular style footrest can be towed using the tow bar.
1. Remove the two set screws on each mounting bracket.
2. Position the mounting brackets around the handcycle rear frame.
NOTE: Make sure that the tow bar is centered
on the handcycle rear frame.
3. Using two set screws for each
mounting bracket, secure the mounting
brackets to the handcycle rear frame.
4. Secure the tow bar to the handcycle
with the mounting brackets and set
screws.
5. Secure the wheelchair to the tow bar
with the fastening strips provided.
Part No 1114850
Mounting Tube
Water
Bottle
FIGURE 9.2 Installing the Water Bottle
61
SECTION 9—OPTIONS
Fastening Strip
Set Screws
FIGURE 9.3 Installing/Using the Tow Bar
Recumbent Handcycle Series
Tow Bar
Mounting
Bracket
Handcycle
Rear Frame