Adjusting/Replacing The Parking Brake; Adjusting The Parking Brake; Replacing The Parking Brake - Invacare Force Owner's Operator And Maintenance Manual

Crank
Handle
FIGURE 8.9 Adjusting Twenty-Seven Speed Cassette Chain

Adjusting/Replacing the Parking Brake

Before using your handcycle, inspect the parking brake for proper operation.
NOTE: For this procedure, refer to FIGURE 8.10.

Adjusting the Parking Brake

Cable
1. Loosen the hex nut and turn the adjuster barrel clockwise (tighten) or
counterclockwise (loosen) to adjust the cable. Retighten hex nut.
Brake Pads
1. Adjust the brake pad assembly so that when the parking brake is engaged the brake
pads rest solely on the rim of the wheel.

Replacing the Parking Brake

Brake Pads
1. Remove the mounting nuts and replace brake pads.
2. Secure with existing hardware and adjust.
Part No 1114850
Clamps
WARNING
SECTION 8—SERVICE PROCEDURES
Fork
57
Recumbent Handcycle Series