MAINTENANCE
Replacing the Knee Pad
NOTE: For this procedure, refer to FIGURE 7.4.
1. Remove the four button screws and washers that secure existing knee pad to the stand
up lift.
2. Remove the existing knee pad from stand up lift.
3. Position the mounting holes in the new knee pad with the mounting holes in the stand
up lift.
4. Using the existing hardware, secure the new knee pad to the stand up lift.
Replacing the Padded Cover
NOTE: For this procedure, refer to FIGURE 7.5.
1. Pull fastening strips on the existing padded cover apart.
2. Remove the existing padded cover from the lift arm.
3. Position the new padded cover around the lift arm.
4. Secure fastening strips on the new padded cover
Stand Up Lift Model RPS350-2
Knee Pad
FIGURE 7.4 Replacing the Knee Pad
FIGURE 7.5 Replacing the Padded Cover
Stand Up Lift
Washers
together.
34
Part No. 1145811