Audio Menu; Selecting The Audio Input Signal (Audio In) - Sony SRW-5800 Operation Manual

4-6 AUDIO Menu

In the AUDIO menu, make audio signal adjustments. The
AUDIO menu screen shows the VTR operation mode,
current position time code, time code type, and so on.
Button Indication
[F1]
AUDIO IN
[F3] DIGOUT EXCHNG
[F5]
SDOUT EXCHNG
ALT/[F3] REPLACE MODE
ALT/[F4] ANALOG REPLACE
Display when audio output channel
settings do not match track number
settings
• As shown below, "EXCHNG" is displayed if even one
of the HD SDI, AES/EBU, SD SDI output channels does
not match the corresponding track number.
• The button in the AUDIO menu is highlighted in
[F3]
orange if even one of the HD SDI, AES/EBU audio
output channels does not match the corresponding track
number on the tape.
To access the AUDIO menu screen
Press the AUDIO button.
Function
Accesses the AUDIO INPUT menu
Digital audio output signal source track selection
(HD SDI, SD SDI, AES/EBU)
However, [F5] (SDOUT EXCHNG) can be used to set
SD SDI source tracks independently.
Digital audio output signal source track selection (SD
SDI)
CH1 to CH8 assignment settings in response to an
external digital audio preset command
CH9 to CH12 assignment settings in response to an
external analog audio preset command
In this case, if SDOUT EXCHNG is set to "dis", the
button is also highlighted in orange.
• The
orange if even one of the SD SDI audio output channels
does not match the corresponding track number on the
tape.
4-6-1 Selecting the Audio Input
"EXCHNG" display
Signal (AUDIO IN)
To select the audio input signal for CH1 to CH12, use the
following procedure.
1
Settings
SDI, AES/EBU
TR1 to TR12
dis, ena, TR1 to TR12
[F5] button in the AUDIO menu is highlighted in
Press the [F1] (AUDIO IN) button.
The AUDIO INPUT menu appears, together with an
audio input selection window.
[F5]
89
4-6 AUDIO Menu