Reference Signals; Reference Signals For Output Video - Sony SRW-5800 Operation Manual

3-2 Reference Signals

This section describes how reference signals for the video
output are selected.

3-2-1 Reference Signals for Output Video

Depending on the operating condition, VTR SETUP menu
settings, the input signal, and the video output signal from
the VTR can be synchronized as follows.
Start
What is the setting of
ext.
the VTR SETUP menu
item 005 "SERVO/AV
REFERENCE select"?
auto
Is the VTR currently
recording or is EDIT
PRESENT on?
No
What is the setting
of the VTR SETUP
menu item 006
"EXTERNAL
REFERENCE
select"?
extrn HD
Is there a signal of the
correct frequency on
the REF. INPUT 1 or
a)
2 connector?
No
Synchronization
with the reference
video signal input to
the REF. INPUT 1
or 2
a) The signal on the REF. INPUT 2 connector is the signal for FORMAT CONV.
output. Use the "A08: FC REFERENCE select" menu item to switch between
HD and SD for the signal input to the REF. INPUT 2 connector.
input
Yes
extrn SD
Is there a signal of the
Yes
correct frequency on
the REF. INPUT 1 or
a)
2 connector?
No
a)
connector
No external synchronization (synchronization is internal)
Is there an input
Yes
signal on the HD SDI
INPUT connector?
Synchronization
with the video signal
input to the REF.
a)
INPUT 1 or 2
connector
Yes
No
Synchronization
with the video signal
input to the HD SDI
INPUT connector
3-2 Reference Signals
31