Displaying The Pulldown Time Code (Pdtc Disp); Hksr-5001 Is Installed); Superimposition Of Character Information; Chara Super/H-Pos/V-Pos) - Sony SRW-5800 Operation Manual

4-3-10 Displaying the Pulldown Time
Code (PDTC DISP) (when HKSR-
5001 is installed)
To display the pulldown time code, follow the steps below.
1
Press the TC button, then press the ALT button.
The ALT+TC menu appears.
2
Press the [F4] (PDTC DISP) button to select
(highlight) "on".
Each time you press the button, "on" and "off"
alternate.
on: Displays the pulldown time code.
off: Does not display the pulldown time code.
4-3-11 Superimposition of Character
Information (FC CHARA/CHARA
SUPER/H-POS/V-POS)
To superimpose the characters representing time code data
and operation mode information on the output signals, use
the ALT/[F4] (PD CHARA) and ALT/[F6] (CHARA
SUPER) buttons.
Button Setting Connector to which the characters
are superimposed
ALT/[F4] on FORMAT CONV. OUT connector (on
two connectors)
ALT/[F6] on • MONITOR connector of HD SDI
OUTPUT
• SD OUT COMPOSITE (MONITOR)
connector
• MONITOR connector of SD SDI
OUT
Contents of superimposed data
Note
The example above shows the factory-set contents of data.
By changing the setting of the VTR SETUP menu item 626
"DISPLAY INFORMATION select", different types of
information can also be displayed on the second line.
a Types of time data
Meaning
Symbol
CTL CTL counter data
TCR LTC reader time code data
UBR LTC reader user bit data
TCR. VITC reader time code data
1 Types of time data
Time data
2 Drop frame mark of the
time code reader
3 Drop frame mark of the
time code generator
4 Field mark of the
VITC data
5 Operation mode
63
4-3 TC Menu