Sony SRW-5800 Operation Manual page 44

9
Press the [F10] (EXIT) button.
The SET UP menu appears again.
Recalling the contents of a "Memory
Stick"
The contents stored in a "Memory Stick" can be recalled to
the current VTR memory bank.
1
Press the SET UP button.
The SET UP menu appears in the display.
2
Press the [F2] (MEMORY CARD) button.
The MEMORY CARD (MEMCARD) menu appears
in the display.
3
Press the [F8] (DIRECTION) button to select the ,
direction.
The right cursor bar flashes.
4
Move the cursor (B) to the "Memory Stick" side using
the cursor T button and use the cursor R or r buttons
to place the cursor bar by the memory bank where the
settings were saved.
44
4-1 Registering and Storing Menu Settings
Saved data
5
To change the title of the memory bank, press the [F6]
(EDIT TITLE) button.
The title can also be changed after the settings are
recalled.
For details, see "4-1-6 Adding Titles to the Data" on
page 45.
6
Press the cursor t button to move the cursor (B) to
the VTR side, then press the cursor R or r button to
move the cursor to the VTR memory bank number
where the recalled data are to be stored.
To change the current VTR menu settings
Move the cursor (B) to [C] (CURRENT SETUP).
To replace all VTR memory bank contents with
"Memory Stick" data
Press the [F7] (SELECT ALL) button.
Note
If there are protected items at the destination end, it is
not possible to select the [F7] (SELECT ALL) button.
7
Press the [F9] (COPY) button.
A message asking you to confirm the operation
appears in the display.
8
Press the [F9] (COPY) button while holding down the
SFT button.
The VTR recalls the contents of the "Memory Stick".
Destination
(flashing)