Lower Control Panel - Sony SRW-5800 Operation Manual

h PHONES level control
Adjusts the output level to the PHONES jack.
For details, see "5-1-2 Selecting Audio Signals" on
page 99.

2-1-2 Lower Control Panel

1 Menu control section
0 FULL/FINE button
qa PB LEVEL button
qs REC LEVEL button
a MONITOR L buttons
Select the audio signal output from the MONITOR
OUTPUT L connector. This assigns the desired channel to
the MONITOR OUTPUT L connector. If you assign more
than one channel to the same monitor output connector, a
mixed audio signal is output.
You can also make this setting using the VTR SETUP
menu item 807 "AUDIO MONITOR-L select".
In the audio playback level adjustment mode, this is used
to select the channel to be adjusted.
b MONITOR R buttons
Select the audio signal output from the MONITOR
OUTPUT R connector. This assigns the desired channel to
the MONITOR OUTPUT R connector. If you assign more
than one channel to the same monitor output connector, a
mixed audio signal is output.
16
2-1 Control Panel
1 MONITOR L buttons
CH1
OVER
dB
0
-10
-20
-30
9 DISPLAY button
-40
L R
CH1
EDIT PRESET
F1
F2
F3
F4
DIAG
ALT F5
7 ALT button
8 DIAG button
i PHONES jack
Connect stereo headphones for audio monitoring during
recording, playback, and editing. Adjust the headphone
output level with the PHONES level control.
CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10
OVER OVER OVER OVER OVER OVER OVER OVER OVER
dB dB dB dB dB dB dB dB dB dB
0 0 0 0 0 0 0 0 0
-10 -10 -10 -10 -10 -10 -10 -10 -10 -10
-20 -20 -20 -20 -20 -20 -20 -20 -20 -20
-30 -30 -30 -30 -30 -30 -30 -30 -30 -30
-40 -40 -40 -40 -40 -40 -40 -40 -40 -40
L R L R L R L R L R L R L R L R L R
CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10
F6 F7 F8 F9 F10
6 Function buttons
You can also make this setting using the VTR SETUP
menu item 808 "AUDIO MONITOR-R select".
In the audio playback level adjustment mode, this is used
to select the channel to be adjusted.
c MULTI CONTROL knob
Used to set the audio recording/playback level and make
settings in the SET UP menu (see page 93).
d Menu selection buttons
These select the menu screen displayed on the display.
HOME button: Press this to go to the HOME menu
screen. The home menu provides settings for the basic
VTR operations and editing operations.
TC button: Press this to go to the TC (time code) menu
screen. In the time code menu, you can switch LTC/
2 MONITOR R buttons
3 MULTI CONTROL knob
MULTI
L
CONTROL
CH11 CH12 MONITOR
R
HOME
OVER OVER
dB
0 0
-10
-20
TC
-30
-40
L R L R
CH11 CH12
VIDEO
VIDEO TC
AUDIO
CUE
PF1
PF2
SET UP
4 Menu selection buttons
5 Color display