Sony SRW-5800 Operation Manual page 72

Button Indication
[F10] WRITE/EXIT
ALT/[F1] FORMAT T-Fil
ALT/[F2] UNDO ALL
ALT/[F3] ATTRIB EDIT
ALT/[F4] COPY to CUE
ALT/[F7] WRITE PRTEC
ALT/[F10] WRITE/EXIT
Formatting a memory label
1
Press the ALT/[F1] (FORMAT T-Fil) buttons.
2
Press the [F1] (FORMAT T-Fil) button while holding
down the SFT button.
A message appears (in the control panel display)
requesting confirmation of the formatting operation.
To cancel the formatting operation
Press the CLR button.
3
Press the [F1] (FORMAT T-Fil) button while holding
down the SFT button.
"COMPLETED" appears in the control panel display.
Prohibiting TELE FILE menu operations
Press the ALT/[F7] (WRITE PRTEC) buttons.
on: All TELE FILE menu operations are prohibited.
off: All TELE FILE menu operations are permitted.
Changing a title
1
Press the ALT/[F3] (ATTRIB EDIT) buttons.
72
4-4 CUE Menu
Function
Closes the TELE FILE menu
after saving changes to the
memory label.
Formats the memory label.
Undoes all changes.
Changes the ID, ADMIN, or
TITLE data in the information
window.
Copies the time data of a cue
point to another cue point
indicated in the CUE menu.
Prohibits TELE FILE menu
operations.
Closes the TELE FILE menu
after saving changes to the
memory label.
2
Press the R or r button to select TITLE, and then press
the ENTRY button.
3
Press the cursor T or t button to select a character.
4
Press the [F7] (SET LETTER) button or the cursor
center button.
The selected character is entered.
5
Repeat steps 3 and 4 to enter more characters.
To enter a space
Press the [F5] (SPACE) button.
If you enter a wrong character
Press the [F6] (BACK SPACE) button to go back.
Then re-enter the character.
To start the procedure over again
Press the [F9] (CANCEL) button to start again.