Memory Stick" Operations - Sony SRW-5800 Operation Manual

3
Press the [F8] (DIRECTION) button to select the <
direction.
The left cursor bar flashes.
4
Press the cursor R or r button to move the cursor (B) to
the number of the VTR memory bank to be recalled.
5
Press the [F9] (COPY) button.
A message asking you to confirm the operation
appears in the display.
To cancel the recalling operation
Press the CLR button.
6
Press the [F9] (COPY) button while holding down the
SFT button.
The menu settings are recalled from the selected VTR
memory bank.
When the recalling process has been completed, the
title of the VTR bank appears under CURRENT
SETUP in the display.
7
Press the [F10] (EXIT) button.
The SET UP menu appears again.

4-1-5 "Memory Stick" Operations

You can store menu settings in the VTR memory banks
and cue point data to a "Memory Stick" for recall later.
PCMCIA card slot
To eject the "Memory Stick"
Raise up the lower control panel, and press the eject button
on the memory card adaptor inserted in the PCMCIA slot.
For details of opening and closing the control panel, refer
to the Maintenance Manual.
Notes
• When inserting a "Memory Stick", press the memory
card adaptor that accommodates the "Memory Stick"
firmly in as far as it will go. The stick recognition status
is shown on the MEMCARD menu screen. If not
inserted properly, reinsert it.
• While data is being read from or written to the "Memory
Stick", the status appears on the screen. During these
operations, do not remove the "Memory Stick".
Formatting a "Memory Stick"
"Memory Sticks" must be formatted before you can use
them.
1
Insert the "Memory Stick".
2
Press the SET UP button.
The SET UP menu appears in the display.
3
Press the [F2] (MEMORY CARD) button.
The MEMCARD menu appears in the display.
4
Press the [F1] (FORMAT CARD) button.
A message asking you to confirm the operation
appears in the display.
4-1 Registering and Storing Menu Settings
41