Audio Menu; Digital Audio Output Signal Source Track Selection (Digout Exchng) - Sony SRW-5100 Operation Manual

4-6 AUDIO Menu

In the AUDIO menu, make audio signal adjustments. The
AUDIO menu screen shows the operation mode, current
position time code, time code type, and so on.
Button Indication
[F3]
DIGOUT EXCHNG
[F5] SDOUT EXCHNG
Display when audio output channel
settings do not match track number
settings
• As shown below, "EXCHNG" is displayed if even one
of the HD SDI, AES/EBU, SD SDI output channels does
not match the corresponding track number.
• The button in the AUDIO menu is highlighted in
[F3]
orange if even one of the HD SDI, AES/EBU audio
output channels does not match the corresponding track
number on the tape.
In this case, if SDOUT EXCHNG is set to "dis", the
button is also highlighted in orange.
• The button in the AUDIO menu is highlighted in
[F5]
orange if even one of the SD SDI audio output channels
84
4-6 AUDIO Menu
To access the AUDIO menu screen
Press the AUDIO button.
Function
Digital audio output signal source track selection
(HD SDI, SD SDI, AES/EBU)
However, [F5] (SDOUT EXCHNG) can be used to set
SD SDI source tracks independently.
Digital audio output signal source track selection (SD
SDI)
does not match the corresponding track number on the
tape.
4-6-1 Digital Audio Output Signal
Source Track Selection (DIGOUT
EXCHNG)
"EXCHNG" display
To make the source track selection for the digital audio
output signal (audio multiplexed with HD SDI and SD SDI
(1 to 8 channels), and AES/EBU audio output are targeted)
on each of channels 1 to 12, use the following procedure.
Note that when [F9] (SDOUT EXCHNG) in the SDOUT
menu is set to "ena", SD SDI source track selection
follows the settings of the SDOUT menu.
1
[F5]
Settings
TR1 to TR12
dis, ena, TR1 to TR12
Press the [F3] (DIGOUT EXCHNG) button.
The DIGOUT menu appears, together with a source
track selection window for the digital audio output
signals.