Sony SRW-5800 Operation Manual page 113

1
Press the appropriate INSERT button ([F4] (INS TC),
[F5] (INS VIDEO), [F6] (INS AUDIO)).
2
Press the RECORDER or PLAYER button to select
the VTR for which edit points are to be set.
The button lights up.
3
To locate the edit points, rotate the search dial in jog or
shuttle mode.
For details on jog/shuttle playback modes, see "5-4-2
Variable Speed Playback" on page 104.
4
Press one of the IN, OUT, AUDIO IN or AUDIO OUT
button while holding down the ENTRY button.
5
Repeat steps 2 to 4 to set the remaining edit points.
Setting an edit point with the numeric buttons
1
Press the desired INSERT button ([F4] (INS TC), [F5]
(INS VIDEO), [F6] (INS AUDIO)).
2
Press the RECORDER button or PLAYER button, to
select the VTR on which you will set the edit point.
The button you pressed lights.
3
With the numeric buttons, enter data into the data entry
window.
For example, to enter 01H00M30S00F, press 1, 0, 0, 3,
0, 0, 0. (You need not input leading zeros. If the
entered value consists of less than eight digits, the
leading digit(s) is (are) set to zero(s) when you press
the SET button.)
To delete entered data
Press the CLR button.
4
Press the SET button to confirm the input data.
5
Press any of the IN, OUT, AUDIO IN, and AUDIO
OUT buttons.
When the edit point is set, it appears on the editing data
display.
About automatic split edit point setting
Split editing requires a total of eight edit points: four edit
points for video editing (IN and OUT points for both the
recorder and player VTRs) and four edit points for audio
editing (AUDIO IN and OUT points for both the recorder
and player VTRs). However, as soon as you set five edit
points, the VTR automatically sets the remaining three
points. For example, if you set three edit points for video
(or audio) and two for audio (or video), the remaining three
points are automatically set, regardless of whether these
points are for the recorder or player.
In the following example, the points enclosed in a box
have been set manually and the AUDIO OUT point for the
recorder VTR, and the AUDIO IN and OUT points for the
player VTR have been set automatically.
Note that whether set manually or automatically, all edit
points can be changed or deleted at any time.
Data entry window
SET is displayed.
113
6-1 Basic Automatic Editing