Selecting The Edit Mode; Setting Edit Points - Sony SRW-5800 Operation Manual

6-1-3 Selecting the Edit Mode

Select assemble or insert mode.
[F3] (ASSEMBLE) button in the HOME menu
[F4] (INS TC) to [F6] (INS AUDIO) buttons in the HOME
menu
Press one of the following buttons to select the respective
edit mode:
• Assemble mode: [F3] (ASSEMBLE) button in the
HOME menu
• Insert mode: the appropriate INSERT button in the
HOME menu, [F4] (INS TC), [F5] (INS VIDEO), [F6]
(INS AUDIO)

6-1-4 Setting Edit Points

This section describes how to set edit points (IN and OUT
points). In insert mode, a technique called split editing
allows you to set edit points separately for video and audio.
Positioning and setting edit points
1
Press the RECORDER or PLAYER button to select
the VTR for which edit points are to be set.
The button lights up.
2
Rotate the search dial in jog or shuttle mode to position
the edit point.
For details on jog or shuttle playback, see "5-4-2
Variable Speed Playback" on page 104.
3
Press the IN (or OUT) button while holding down the
ENTRY button.
The time data for the IN (or OUT) point appears in the
menu display.
4
Repeat steps 1 to 3 to set the remaining edit points.
Setting edit points with the numeric buttons
1
Press the RECORDER or PLAYER button to select
the VTR for which edit points are to be set.
The button lights up.
2
Enter the edit point data with the numeric buttons.
For example, to enter 01H00M30S00F, press 1, 0, 0, 3,
0, 0, 0. (You need not input leading zeros. If the
entered value consists of less than eight digits, the
leading digit(s) is (are) set to zero(s) when you press
the SET button.)
To delete entered data
Press the CLR button.
CLR button
Data entry window
6-1 Basic Automatic Editing
111