Items Relating To Digital Processing (Nos. 902 To - Sony SRW-5800 Operation Manual

Items Relating to Digital Processing (Nos. 902 to ...)

Item number Item
902 FREEZE MODE
903 FREEZE CONTROL
FROM KEY PANEL
905 STOP FREEZE
CONTROL
911 ACTIVE LINE 1080
CONVERT MODE
Setting Function
[field] Specifies the freeze (still-picture) mode and freeze timing
field1 during manual freezing (by REMOTE 1-IN(9P) or REMOTE
field2 2 PARALELL I/O(50P) connector or on the control panel) or
frame1+2 automatic freezing.
frame2+1 field: Freezes the odd or even field, depending on the
timing in freeze mode.
field1: Freezes the first (odd) field
field2: Freezes the second (even) field
frame1+2: Freezes the first and the subsequent second
frame2+1: Freezes the second field and the subsequent
In the case of freezing in playback modes other than
normal playback, the picture is frozen in frame mode only
when dynamic tracking is performing a frame operation.
The picture is frozen in field mode when dynamic tracking is
not operating.
The frozen picture does not change even if you change this
setting during freeze mode. The change to this setting
becomes effective the next time the VTR outputs a still
picture.
When the stop freeze function is enabled, regardless of the
setting of this item, the picture is frozen in frame mode only
when dynamic tracking is performing a frame operation, or
is frozen in field mode when dynamic tracking is performing
a field operation or when it is not operating.
[momentary]
Determines the freeze operation control by button
latch operations.
momentary: The picture is frozen only while the button is
latch: The picture is frozen when the button is pressed, and
The frozen picture is cancelled when the button is pressed
Button operations
Freezing in odd or even (first or second) field is specified
by item 902. Distinction between the first or second field,
follows the distinction in the reference signal.
disable Enable or disables the stop freeze function.
[enable]
Selects the conversion mode of the effective scanning line
number.
1035k1080(PANEL)
1035k1080(CONV): Convert the effective scanning line
1035k1080(PANEL): Convert the effective scanning line
Note
This setting is valid only for HDCAM playback when the
optional HKSR-5802 is installed.
field
first field
held down.
remains frozen when the button is released.
again.
number from 1035 to 1080 preserving the aspect ratio
of the image.
number from 1035 to 1080. The 1035 lines of the
image are inserted into the 1035 lines of 1080 lines,
then it is horizontally compressed.
161
Menu List