Vtr Setup Menu - Sony SRW-5800 Operation Manual

Note
When operating the VTR through an external device with
the ALT/[F9] or ALT/[F10] buttons set to "on", all of the
tape operation and editing buttons are disabled, with the
exception of the STOP and EJECT buttons. You may also

4-7-1 VTR SETUP Menu

All menu items required for setting up the VTR operating
conditions are displayed in the scrollable VTR SETUP
menu.
For HOME, TC, VIDEO, AUDIO, PF1, and PF2,
including the screens displayed by pressing the ALT
button, you can register about 120 menu items.
For details on the VTR SETUP menu items, see the
Appendix "Menu List" on page 134.
Button Indication
[F1]
PREV PAGE
[F2]
NEXT PAGE
[F5] CATEGORY
[F6]
NAME
[F7] SCROLL
[F8]
CHANGE DATA
[F9]
CANCEL
[F10] SAVE/EXIT
94
4-7 SET UP Menu
Category/index window
Function
Moves to the beginning of the previous category.
Moves to the beginning of the next category.
Display by category
Display in alphabetical order
Scrolling display of all menus
Changes the setting.
Cancels the setting operation.
Sets the value and exits the VTR SETUP menu.
set the VTR so that all buttons are enabled or disabled.
Perform this setting using the VTR SETUP menu item 008
"LOCAL FUNCTION ENABLE". You cannot, however,
disable the menu and remote operation mode selection
buttons.
For details of the PF assign menu, see "4-1-3 Registering
Items to the VTR SETUP Menu" on page 38.
To activate the VTR SETUP menu
Press the SET UP button, then press the [F6] (VTR
SETUP) button.
Item window