Chapter 5 Recording/Playback; Preparing For Recording; Setting Switches And Menus - Sony SRW-5800 Operation Manual

Recording/Playback

5-1 Preparing for Recording

5-1-1 Setting Switches and Menus

Before recording, set the switches and menus as shown in
the diagram below.
For details, see the pages indicated in the parentheses.
POWER switch: ON
98
5-1 Preparing for Recording
REMOTE buttons: None of these buttons light up.
MONITOR L/R buttons: Audio channels to be monitored (page 99)
Recording level indication: Reference level or appropriate recording level (page 100)
Menu settings
[F2] (REC INH) button in the HOME menu: off
[F1] (TIMER SEL) button in the TC menu: Select the time data to be displayed.
[F6] (REGENE SOURCE) button in the TC menu: int-LTC, int-VITC, ext-LTC, SDI-VITC, SDI-LTC (page 55)
[F7] (TCG MODE) button in the TC menu: regene, prst, auto (page 55)
Chapter
Note
With this unit, 1035/59.94i or 60i signal is recorded as
1080/59.94i or 60i signal. When 1035 signal is input, a
warning message is displayed,
For details, see "Warning Messages" on page 128.
Indicators: Check the reference signal.
5