Controls - Vulcan-Hart GH30 Installation & Operation Manual

CONTROLS (Fig. 21)
RANGE TOP BURNER
VALVE KNOB
OVEN BURNER VALVE KNOB
RED IGNITION BUTTON
THERMOSTAT CONTROL DIAL
ON-OFF SWITCH
(CONVECTION OVENS ONLY)
THERMOSTAT CYCLING LIGHT
(CONVECTION OVENS ONLY)
When opened, allows gas to flow to the range section. To open
valve, turn knob counterclockwise. To close valve, turn knob
clockwise.
When opened, allows gas to flow to the oven burner. To open
valve, turn knob counterclockwise. To close valve, turn knob
clockwise.
Used to ignite the oven pilot. To operate, push button in and follow
pilot lighting instructions.
Used to regulate the amount of heat needed to cook a product.
The thermostat dial's temperature range is from 150°F to 500°F
(65°C to 260°C). Turn dial counterclockwise to increase
temperature and clockwise to decrease temperature.
To turn power on, push switch to the ON position. If switch light
illuminates, power is being transmitted to the unit.
When lit, indicates that the thermostat is calling for heat. When
thermostat reaches the dial set temperature, the light will
automatically shut off.
RANGE TOP BURNER VALVE KNOBS
PL-51281
Fig. 21
– 24 –
OVEN BURNER VALVE KNOB
ON/ OFF SWITCH
RED IGNITION BUTTON
THERMOSTAT CYCLING LIGHT
THERMOSTAT CONTROL DIAL