Vulcan-Hart GH6 Specifications

SPECIFICATIONS
Heavy duty six burner gas range with oven, Vulcan-Hart Model
No. GH6. Stainless steel body and 6" adjustable legs. 1
front gas manifold. Six 30,000 BTU/hr. cast burners with lift-o heads.
Individual pilot lights for each burner. Six cast iron top grates with
aeration bowls. Oven interior measures 26"w x 28"d x 14"h.
Porcelain enamel on steel hearth, door and side liners. One oven
rack and two rack positions. 50,000 BTU/hr. heavy cast "Flame
Retention" burner with pilot ignition. Thermostat adjusts from 150°
to 500°F. Controls located in the cool zone.
Exterior dimensions: 34"w x 39
6" legs.
CSA design certi ed. NSF listed.
SPECIFY TYPE OF GAS WHEN ORDERING.
SPECIFY ALTITUDE WHEN ABOVE 2,000 FT.
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
F-32396 (05/06)
⁄ " diameter
1
4
⁄ "d x 36" working height on
1
8
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
Item # __________________________
MODEL GH6
OPEN BURNER HEAVY DUTY GAS RANGE
GH6 Standard Oven
GH6C Convection Oven
GH6S Storage Base
STANDARD FEATURES
Stainless steel body and 6" adjustable legs.
1 ⁄ " diameter front gas manifold.
1
4
Six 30,000 BTU/hr. cast burners with lift-o heads. Individual
pilot lights for each burner.
Six cast iron top grates with aeration bowls.
Oven controls located in the cool zone.
Oven interior measures 26"w x 28"d x 14"h. Porcelain enamel
on steel hearth, door and side liners. One oven rack and two
rack positions. 50,000 BTU/hr. "Flame Retention" burner with
pilot ignition. Thermostat adjusts from 150° to 500°F.
One year limited parts and labor warranty.
OPTIONS
Snorkel convection oven in place of standard oven. Add
TM
su x "C" to the model number. Porcelain enamel on steel
interior measures 26 ⁄ "w x 22
1
8
and ve rack positions. 32,000 BTU/hr. burner with pilot
ignition. Thermostat adjusts from 200° to 500°F.
motor with 7 foot power cord and plug. 120/60/1, 5 amps.
Cabinet storage base in place of standard oven. Add the su x
"S" to the model number.
Stainless steel back nishing panel.
Common front top ledge up to 68" wide. (Not for use on griddle
tops, spreader plates and deep fat fryers.)
Cap and cover manifold end(s). (No charge.)
1 / " stainless steel toe base - 31
5
8
Set of four 5" diameter casters, two locking.
Stainless steel dolly frame with casters, up to 102" wide.
Cooling fan for Snorkel
when unit is installed with a back nishing panel or a toe base.
⁄ " rear gas connection. (Refer to spec sheet F-31525).
3
4
Second year extended limited parts and labor warranty.
C.S.I. Section 11420
⁄ "d x 14 ⁄ "h. Three oven racks
3 1
32 8
⁄ H.P. blower
1
4
⁄ " working height.
5
8
convection oven motor. Required
TM