Operation; Controls - Vulcan-Hart E36L Installation And Operation Manual

WARNING: THE RANGE AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING, CLEANING
OR SERVICING THE RANGE.
CONTROLS (Fig. 6)
Element Controls
Element Indicator Lights
Hot Top Switch
Griddle Thermostat
Griddle Indicator Light
Oven Thermostat
Infinite Switch for Oven
Top Heating Element
Oven Indicator Light

OPERATION

Oven
Indicator Oven
Light Thermostat
Oven
Infinite
Switch
Model E36L Shown
Fig. 6
— Infinite load switches that control and maintain heat to the surface plates.
The controls are arranged in pairs; the left knob controls the front plate and
the right knob controls the rear plate.
— When lit, indicate heat is being supplied to the element.
— (Not shown.) A 4-heat switch (HI, MED HI, MED LO, LO) controls and
maintains heat to the hot top section.
— (Not shown.) Regulates the amount of heat needed to maintain the set
temperature. Each 12" (305 mm) section of the griddle has its own
thermostat with a temperature range of 150°F (65°C) to 550°F (288°C).
— (Not shown.) Will be lit until the selected temperature is reached or when it
is being maintained.
— Regulates the amount of heat needed to control and maintain oven
temperature around the desired set temperature. The temperature range is
from 150°F (65°C) to 550°F (288°C). Turn dial counterclockwise to increase
temperature and clockwise to decrease temperature.
— Provides directional heat control. Adjust as needed for the amount of
top heat required.
— Will be lit until the selected temperature is reached or when it is being
maintained.
– 9 –
Element
Control
Knobs
Element
Indicator
PL-40464-1
Light