Operation; Controls - Vulcan-Hart EV12 Series Installation & Operation Manual

WARNING: THE RANGE AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING, CLEANING OR SERVICING
THE RANGE.
CONTROLS (Fig. 6)
Element Control
Knobs
Element Controls —
Hot Top Switch —
Griddle Thermostat —
Griddle Indicator Light —
Oven Thermostat —
Infinite Switch for Oven
Top Heating Element
Oven Indicator Light —

OPERATION

Model EV36 Shown
Infinite load switches that control and maintain heat to the surface plates. The
controls are arranged in pairs; the left knob controls the front plate and the right
knob controls the rear plate. NOTE: On 480 volt units, French plates are controlled
with a 3-heat switch (HIGH = 2000 watts, MED = 1000 watts, LOW = 500 watts).
(Not shown.) A thermostat (1-10) controls and maintains heat to the top section.
Select desired heat level, (1 is minimum, 10 is maximum).
(Not shown.) Regulates the amount of heat needed to maintain the set
temperature. Each 12" (305 mm) section of the griddle has its own thermostat with
a temperature range of 200°F (93°C) to 550°F (288°C).
(Not shown.) Will be lit until the selected temperature is reached or when it is being
maintained.
Regulates the amount of heat needed to control and maintain oven temperature
around the desired set temperature. The temperature range is from 200°F (93°C) to
550°F (288°C). Turn dial counterclockwise to increase temperature and clockwise to
decrease temperature.
— Provides control for top browning element. Adjust as needed for the amount
of top heat required in order to brown product as desired. NOTE: Infinite switch not
available on 480 volt units. This position on the panel will be filled with a panel
plug.
Will be lit until the selected temperature is reached or when it is being maintained.
Fig. 6
9
Oven Infinite Switch
Knob
Oven Indicator Light
Oven Thermostat
Knob
F-38251 (08-09) REV D