GigE Server Warning Example 1b: IP error with multiple NICs
As a second example, the screenshot below shows an IP conflict error similar to the example above but the second
NIC has no camera connected (or only an Ethernet switch).
•
The following illustration shows an example of this fault condition. The second NIC has no Genie connected
ether directly or via a switch.
•
The solution again is that the second NIC must use the persistent IP mode or must have a DHCP server on that
subnet.
•
For more information see "Multiple Camera
page
77, and "IP Configuration Mode
Genie Monochrome Series-GigE Vision Camera
LLA Mode (only 1 NIC)
NIC 1
LLA Mode (error)
NIC 2
Persistence Mode - OK
Issues" on page
112, "Using Genie with Ethernet
Details" on page
77.
Ethernet
Switch
Switches" on
Troubleshooting • 115