CamExpert available LUT examples are briefly described below. The LUT function graphic simplifies
understanding the operation especially when user settings modify the LUT function.
•
Normal (default): modifies all LUT entries using a linear mapping such that a gray level input is equal to
the output
•
Arithmetic operation: modifies all LUT entries using an arithmetic operation
•
Binary pattern: modifies some LUT entries based on a binary pattern
•
Boolean operation: modifies all LUT entries using a Boolean operation
•
Gamma correction: modifies all LUT entries using Gamma correction function
•
Linear invert: modifies all LUT entries using a linear mapping with a negative slope
•
Position shift: modifies LUT entries with a zero position offset
•
Bit shift: modifies LUT entries with a binary bit shift
•
Slope within range: modifies part of a LUT with a linear mapping
•
Single Threshold: modifies all LUT entries using a threshold operation
•
Double Threshold: modifies all LUT entries using a dual level threshold operation
90 • Sapera CamExpert Guide
10-bit Invert LUT
Genie Monochrome Series-GigE Vision Camera