Camexpert Image Buffer And Roi Parameters - Genie M640 User Manual

CamExpert Image Buffer and ROI Parameters

CamExpert provides controls to configure acquisitions via the Image Buffer and ROI Parameters tab. The image
buffer can be easily cropped as desired. Below is the CamExpert dialog and parameter descriptions follow.
Parameter
Pixel Format
Width (in Pixels)
Height (in Pixels)
OffsetX (in Pixels)
OffsetY (in Lines)
Image Flip
Note: When operating in binning mode, the resolution is halved and the coordinate system is scaled accordingly.
For instance, an OffsetX of 20 pixels at nominal resolution is equivalent to an OffsetX of 10 pixels with
horizontal binning enabled.
Genie Monochrome Series-GigE Vision Camera
Description
For the Genie Monochrome series, the image buffer format is Monochrome 8-bit or 10-bit.
Displays the image buffer width (X axis), in pixels.
Displays the image buffer height (Y axis), in pixels.
Specifies the offset in X, from the left of the image, when using an ROI. The image buffer
width is automatically adjusted to compensate for this offset.
Specifies the offset in Y, from the top of the image, when using an ROI. The image buffer
height is automatically adjusted to compensate for this offset.
Enables hardware based horizontal image flip.
Operational Reference • 41