Select NIC Advanced Configuration Properties
Note that the following applies to the Intel Pro NIC driver. Other NIC products may or may not have similar
configuration parameters.
•
From the Start menu go to Settings • Control Panel • Network Connections and select the NIC used to
connect the Genie to.
•
Open the Properties for the Ethernet GigE NIC used with the Genie.
•
Click the Configure button.
•
Click on the Advanced tab. Modify the values for Receive Descriptors and Jumbo Frames as follows.
Receive Descriptors
•
Select the 'Receive Descriptors' property.
•
Change the value to the largest value supported by the installed NIC. In this example the value is 2048.
Genie Monochrome Series-GigE Vision Camera
GigE NIC Configuration
GigE NIC Receive Buffers
Installing the Genie Camera • 25