Certifications; Vibration And Shock Certifications; Supported Industry Standards; Genie Sensor Overview - Genie M640 User Manual

Certifications

EN55022, class A,
CE
EN61000-4-2,
EN61000-4-3,
EN61000-4-4,
EN61000-4-6,
Part 15, class A
FCC
see "EC & FCC Declaration of
Compliancy as per European directive 2002/95/EC
RoHS
(applies to camera part numbers CR-GENx-xxxxx)

Vibration and Shock Certifications

Test (while operating)
Sinusoidal vibrations with identification
of critical frequencies
Random vibrations
Shocks

Supported Industry Standards

Genie Sensor Overview

Each sensor description below provides a specification table and response graphic. The graph describes the sensor
response to different wavelengths of light (excluding lens and light source characteristics). Visible light spans
wavelengths between about 390 - 780 nanometers. Wavelengths below 390 nm are termed ultra-violet while those
above 780 nm. are termed infra-red. The peak response is around 500 nanometers typical for each sensor model,
corresponding to a shade of blue-green.
Genie Monochrome Series-GigE Vision Camera
Radio Disturbance Characteristics
Electrostatic discharge immunity test
Radiated, radio-frequency, electromagnetic field immunity test
Electrical fast transient/burst immunity test
Immunity to conducted disturbances, induced by radio-frequency fields
Conformity" on page 109
Standard
IEC 68-2-6 (1995)
Test Fc
MIL-STD-810E (1989)
method 514.4
Category 10
IEC 68-2-27 (1987)
Test Ea and guide
Genie cameras are 100% compliant with the GigE Vision 1.0 specification
which defines the communication interface protocol used by any GigE
Vision device. The device description and capabilities are contained in an
XML file. For more information see:
http://www.machinevisiononline.org/public/articles/index.cfm?cat=167
Genie cameras implement a superset of the GenICam™ specification which
defines device capabilities. This description takes the form of an XML
device description file respecting the syntax defined by the GenApi module
of the GenICam™ specification. For more information see
www.genicam.org.
Description
Frequency range: 10 to 2000 Hz
2
Amplitude: 5 m/s
Sweep rate: 1 octave per minute
Duration: 1 sweep cycle (to and fro)
Levels and frequencies:
2
0.04 g /Hz from 20 to 1000 Hz
-6 dB/oct. from 1000 to 2000 Hz
Duration: 1 hour
Shape: half-sine
Amplitude: 75 g
Duration: 3 ms
Number: 3 shocks (+) and 3 shocks (-)
Genie Monochrome Series Overview • 9