Printer Status Messages - Kodak Dryview 5800 User Manual

Troubleshooting

Printer Status Messages

Printer
Local Panel
Status
Any Film • Ready LED off
Supply Open • Display is blanked
for open tray
• Status code: 20702
Door Open • Ready LED off
• Attention LED on
• Status code: 20701
Failed • Ready LED off
• Error LED on
• Error code shown
Imager • Ready LED off
Unlock • Unlock LED
Requested flashing for the
requested film tray
Offline • Ready LED off
• Attention LED on
• Status code: 20704
Printing • Ready LED
flashing
Ready • Ready LED on
display shows
count, type, and
size for each film
tray
Self-test • Ready LED off
• the Display shows
the Carestream logo
Service • Ready LED off
Mode • Attention LED on
Status code: 20700
3-2
The following table describes how the local panel and Web Portal indicate
printer status to the user.
Table 3-2: Printer Status Messages
Web Portal
Display
Not Ready
Hood Open
Failed
Not Ready
Printing
Disabled
Printing
Ready
Self-test
Service Mode
2G0733
DICOM Status
WARNING / At least one of the film
COVER OPEN trays is not inserted and
latched into place.
WARNING / The imager hood is open or
COVER OPEN one of the side panels may
be off. The imager is not
"Ready."
See Condition An error has occurred that
Code prevents printing.
n/a The printer will complete
any prints in progress prior
to unlocking a film tray for
removal.
WARNING / The printer has been
PRINTER disabled and does not have
OFFLINE a network connection.
NORMAL The imager is currently
printing films.
NORMAL The imager is online and
the Processor has reached
operating temperature.
WARNING / This occurs when power is
first applied to the imager.
PRINTER INIT
WARNING / The service switch is
PRINTER enabled. The imager is not
OFFLINE "Ready."
Description
2011-09-09