Glossary - Kodak Dryview 5800 User Manual

Glossary

CR
CT
Cycle power
DICOM
Dmax
Dmin
DR
GSDF
GSM
Film model
Key operator
LED
Media
Modality
Monotonic
MPDB
MR
N/A
PLUT
Service image
Shutdown
SMPTE test pattern
2011-09-09
Computed Radiography, the process of creating digital radiographic
images.
Computed Tomography, the process of creating digital tomographic
images.
Cycle power means to shut down and power up the Laser Imager.
Digital Imaging and Communications in Medicine. A TCP/IP-based
protocol for transmitting and receiving medical imaging and related data
over a network.
Dmax means maximum density. Dmax is the density of an area on the
film that has received maximum exposure.
Dmin means minimum density. Dmin is the density of an unexposed
area on the film.
Digital Radiography, the process of creating digital radiographic
images.
Grayscale Standard Display Function.
Gray Scale Manager.
The film model defines the print characteristics for a particular lot of
film.
The person(s) designated by the department manager to receive
applications training and allowed access to password-protected areas to
make system changes.
Light Emitting Diode.
An alternate term for film.
Medical equipment that actually generates medical images (for
example, an MRI).
Continuously increasing. When a calibration sheet, which consists of
strips of increasing density (Dmin) to maximum density (Dmax), is read
by the densitometer, the density values must be monotonic
(continuously increasing). If they are not, an error message is generated.
Modality Preferences Database.
Magnetic Resonance.
Not Available or Not Applicable.
Presentation Look-Up Table.
An image used by service personnel for troubleshooting.
The process of exiting current tasks and applications and turning the
power OFF.
A Society of Motion Picture and Television Engineering monitor test
pattern that is used for analyzing image-quality problems.
2G0733 G-1