Reset Artis To Its Factory State (Hard Reset) - Kurzweil Artis User Manual

Global Mode
RESET Page

Reset Artis to its factory state (Hard Reset)

If you want to want to restore the Artis back to its factory state then select "No".
The factory state means all your existing User Programs & User Multis will be permanantly
erased. This can not be undone. Make sure you have used the Store function to backup all of
the Programs and Multis that you wish to keep. All Global Mode parameters, will be reset to
default settings.
Selecting "No":
User PROGRAMs
User MULTIs
Global Mode
Press "Cancel" if you are unsure, or do not wish to proceed with the reset.
9-22
CAUTION: Performing the following reset, will result in ALL User
Programs & User Multis will be erased. Global parameters are
returned to there default state. This can not be reversed. Kurzweil
recommends that you save (STORE) all your Programs and Multis
that you wish to keep before performing any type of reset on Artis.
ALL USER PROGRAMS ARE DELETED.
ALL USER MULTIS ARE DELETED.
ALL GLOBAL PARAMETERS ARE RESET TO THE
ORIGINAL FACTORY DEFAULTS.