Table of Contents
Advertisement
Settings, con't
Metronome Volume
This setting ranges from 1 (lowest) to 9 (loudest). The default setting is 9. In Settings Mode, press the Prev- or
Next+ button to reach the desired volume level. The Metronome setting is remembered across power cycles.
Local Control
When you play the CUP2A keyboard you hear the resident or "local" voices, because this parameter is normally set to
On. When using your CUP2A with an external sequencer or computer, turn this setting to Off to avoid creating a MIDI
loop which may result in stuck notes or "echoes". Press either the Prev- or Next+ button to set this parameter.
Auto Power Off
This energy-saving feature will automatically shut off power to the unit after a period of inactivity. Simply turning the
power switch off and on will power up the unit once again. This allows you to reduce overall power consumption, and
also extends the lifetime of the instrument. Press the Settings button until the display reads AutoPowerOff. Options
are Disabled, 15 min, 30 min, 1 hour, 2 hours or 4 hours. The default value is 30 min. Pressing the Prev- /Next+
button pair will reset to default.
Audio Input
This parameter enables or disables the audio input jack. In some situations, the user playing the CUP2A may notice
a high frequency noise when not using the Audio Input (that is, with no signal applied to the input jacks). Setting Audio
Input to Disabled will overcome this. The default setting is Enabled. The audio input setting is remembered across
power cycles.
Hard Reset (Restoring Factory Defaults)
This function resets the Andante CUP2A to the original factory default settings. All user changes, saved Favor-
ites, and user recorded songs are erased. This action cannot be undone.
1. Press the Settings button until the display reads HARD RESET?.
2. To perform the Hard Reset function press the Next+ button once.
3. The display now reads CONFIRM?
4. Press the Next+ button again confirm and to reset the CUP2A. The unit will then erase its user
memory, restore all factory settings and reboot.
If you want to cancel the Hard Reset and remain in Settings Mode, press the Prev- button to confirm.
Press any other button to exit Settings Mode.
There is an alternate method for a Hard Reset on your Andante CUP2A:
1. Hold the C8 key down while switching on the power.
2. Continue to hold C8 down until you see "RESETTING" (scrolling) in the display then release.
OS/Objects Version
To check for possible updates to your operating system in Settings Mode press the Settings button until "OS" is
displayed. This will display the current operating software and objects version.
The display first shows the OS version, then the Object version. Visit the Kurzweil website (www.kurzweil.com) to verify
that your CUP2A has the latest versions. These are located under the Downloads tab for the CUP2A. Complete instal-
lation instructions are included in the downloaded files. A standard USB cable will be required for this operation.
page 12
Advertisement
Table of Contents
